Get a Quote

Dewatering bucket elevators that lift and drain washed coal in one step, reducing downstream moisture load.
Already have a washability report? Send it — we size the machine from your coal, not from a catalogue.

The questions that decide whether this equipment fits your plant, answered directly.
| Buyer question | Dehui Mining answer |
|---|---|
| Which material does it lift? | Washed coal, middlings and reject between plant levels — vertical, sealed and compact. |
| What is the main advantage? | Sealed lifting where headroom is limited and product contamination matters. |
| What is the typical duty? | 20–200 t/h at lift heights up to 35 m. |
| What decides the machine size? | Lift height, tonnage and how abrasive the material is. |
| When is it not the first choice? | Horizontal transport — belt conveyors do that duty more cheaply. |
| What is the delivery time? | 25–40 days. |
| What warranty comes with it? | 12 months; buckets and chains stocked. |
| What should my RFQ include? | Tonnage, lift height, material and its moisture. |
Three duties this equipment is built for. Each application page carries the full process detail and field notes.
Feeding and lifting raw coal into the washing circuit.
Lifting dewatered clean coal to stockpile or loading.


The T-type dewatering bucket elevator is built around this dual duty. The bucket chain runs slowly enough for water to drain through the perforated buckets, while still delivering the required tonnage.
Indicative ranges only. Final figures are fixed once your coal data and site conditions are confirmed.
| Parameter | Typical range | What decides it |
|---|---|---|
| Capacity | 50–500 t/h | Set by bucket volume and chain speed. |
| Lift height | up to 30 m | Determines chain and drive sizing. |
| Chain type | Roller chain, wear-resistant | Selected for abrasion and service life. |
| Residual moisture | Reduced versus plain lifting | Perforated buckets drain during the lift. |
Every unit is configured from your washability data, feed size distribution and product target — then factory-assembled and tested before shipment.

Industrial Grade · Factory assembly tested
Combined lifting and dewatering unit for washed coal, with roller chain and perforated buckets.

Industrial Grade · Factory assembly tested
Designed for sump and pit duty where coal and water arrive together and need separating during lift.
Send us your raw coal capacity, feed size and product target — our engineers will recommend a suitable configuration.
Combining lift and drainage saves building height and one piece of equipment. Where very low product moisture is required, a dewatering screen after the elevator is still the right addition.
Chain life depends on abrasion in the product, lift height and lubrication practice. We supply wear-resistant roller chain and specify the inspection interval in the commissioning manual.
Yes within its design range. We size the bucket volume with margin for feed variation, and the drive is selected for the resulting starting torque.
