Get a Quote

Air-pulsated and multi-stage jigs for power coal, coking coal and gangue recovery, with throughput from 60 to 600 t/h.
Already have a washability report? Send it — we size the machine from your coal, not from a catalogue.

The questions that decide whether this equipment fits your plant, answered directly.
| Buyer question | Dehui Mining answer |
|---|---|
| Which coals is a jig best for? | 50–0.5 mm washed coal where the density contrast between coal and refuse is clear — most thermal and coking coals. |
| What is the main advantage? | Water-only separation: no dense medium to lose, low operating cost, and feed quality tolerance. |
| What capacity does one jig section cover? | From about 300,000 TPY single units to 3,000,000 TPY multi-section blocks. |
| What decides the jig model and size? | Your washability curve, feed size range and target product ash. |
| When is a jig not the first choice? | Fine coal below 0.5 mm — flotation or slime circuits handle that range. |
| What is the delivery time? | 45–60 days for a complete jigging section including screens and dewatering. |
| What warranty comes with it? | 12 months, with screen plates and air valves stocked as spares. |
| What should my RFQ include? | Washability data, feed size analysis and the capacity target. |
Three duties this equipment is built for. Each application page carries the full process detail and field notes.
High-throughput thermal coal washing with stable ash control.
Deeper cleaning with middlings handling.
Recovering residual clean coal from gangue streams.


The key variables are stroke, frequency and bed depth. Get them right for your coal and the jig separates cleanly; get them wrong and you either lose clean coal to the reject or carry reject into the product.
Indicative ranges only. Final figures are fixed once your coal data and site conditions are confirmed.
| Parameter | Typical range | What decides it |
|---|---|---|
| Capacity | 60–600 t/h per unit | Matched to plant throughput and number of parallel lines. |
| Feed size | 0–100 mm (typ.) | Wider or narrower ranges change the bed design. |
| Separation accuracy | Ep 0.05–0.12 (coal dependent) | Confirmed against your washability data. |
| Water consumption | 2.5–4 m³/t feed | Feeds the plant water balance calculation. |
Every unit is configured from your washability data, feed size distribution and product target — then factory-assembled and tested before shipment.

Industrial Grade · Factory assembly tested
Widely used for power coal and coking coal. Even bed pulsation, low water consumption, stable performance across feed variation.

Industrial Grade · Factory assembly tested
Two separation stages in one machine for higher precision where clean coal, middlings and reject all need separate handling.

Industrial Grade · Factory assembly tested
Three-stage separation for difficult coals requiring middlings re-washing within a single unit.
Send us your raw coal capacity, feed size and product target — our engineers will recommend a suitable configuration.
Yes, for many coking coals a well-tuned jig reaches the ash target. Where the coal is difficult to wash or the product ash requirement is very low, dense medium separation may be more appropriate — we advise based on your washability data.
It depends on abrasion in your feed. We supply screen plates in wear-resistant material and include replacement guidance in the commissioning documentation.
In many cases yes. We assess the existing water balance, building height and conveyor interfaces before proposing a replacement or additional unit.
