Dense-Medium Coal Washing Solution

Dense-Medium Coal Washing Solution

Dense-medium cyclone and bath separation for difficult-to-wash coal, with magnetite recovery built in.

SOLUTION OVERVIEW

Dense-Medium Coal Washing Solution

When float-and-sink data show narrow density cut points, jigs alone cannot reach target ash — dense-medium separation can. Magnetite suspension acts as the separation medium, and cyclones push precision to E<1.5 even on near-gravity-heavy feeds.

The system covers medium preparation, cyclone or bath separation, drain-and-rinse screens, magnetic separators for magnetite recovery and dilute-medium regeneration — keeping medium loss below 1 kg per tonne of feed.

500K–3M TPYCapacity range
E < 1.5Probable error precision
< 1 kg/tMagnetite loss
±0.02Density control accuracy
Process Flow

Typical Process Flow

Six stages from raw coal to loaded product — each engineered against your washability data and plant layout.

  1. Pre-screening

    Feed is screened and deslimed so only sized coal enters the medium circuit.

  2. DM Separation

    Cyclones or baths separate coal from rejects in a calibrated magnetite suspension.

  3. Drain & Rinse

    Screens drain adhering medium and rinse products clean of magnetite.

  4. Medium Recovery

    Magnetic separators recover magnetite from rinse water for reuse.

  5. Medium Regeneration

    Dilute medium is densified and corrected to the cut-point density automatically.

  6. Slime & Water

    Rinse water reports to the slime circuit for thickening and pressing.

CORE EQUIPMENT

Equipment In This Solution

Manufactured in-house at our 100,000 m² base and trial-run before shipment.

REFERENCES

Related Project Cases

Need a flowsheet for your coal?

Send your washability data and target capacity — our engineers reply with a preliminary flowsheet within 12 hours.

Get Your Plant Design

Get a Quote

Jig machine for coal washing