Coal Slime Washing & Dewatering Solution

Coal Slime Washing & Dewatering Solution

Thickening, filter pressing and water recycling that turn slime into saleable cake at zero discharge.

SOLUTION OVERVIEW

Coal Slime Washing & Dewatering Solution

Slime is where washing plants lose money: fine, high-moisture, hard to sell, and expensive to pond. Our slime circuit treats it as a product stream instead — thickeners classify and concentrate fines, dosing conditions the slurry, and program-controlled XMZ filter presses squeeze out clear water in cycles of a few minutes.

Filtrate and thickener overflow return to the washing circuit, so the plant runs closed-circuit on water and stops paying for tailings handling.

≤ 24%Filter cake moisture
ZeroWaste water discharge
5–10 minPress cycle time
≥ 95%Water recycling rate
Process Flow

Typical Process Flow

Six stages from raw coal to loaded product — each engineered against your washability data and plant layout.

  1. Slime Collection

    Screen undersize and cyclone overflow are collected in an agitated feed tank.

  2. Thickening

    High-rate thickeners with flocculant dosing raise feed solids for efficient pressing.

  3. Conditioning

    The feed tank agitates and doses to keep particle distribution stable for the press.

  4. Filter Pressing

    XMZ program-controlled presses dewater slime into stacked, handleable cake.

  5. Cake Handling

    Cake conveyors and silos move product to blending or out-of-plant dispatch.

  6. Water Return

    Filtrate and overflow report back to the washing circuit as make-up water.

CORE EQUIPMENT

Equipment In This Solution

Manufactured in-house at our 100,000 m² base and trial-run before shipment.

REFERENCES

Related Project Cases

Need a flowsheet for your coal?

Send your washability data and target capacity — our engineers reply with a preliminary flowsheet within 12 hours.

Get Your Plant Design

Get a Quote

Jig machine for coal washing