Get a Quote

Program-controlled chamber filter presses for coal slime dewatering and closed-loop washing water recovery.
Already have a washability report? Send it — we size the machine from your coal, not from a catalogue.

The questions that decide whether this equipment fits your plant, answered directly.
| Buyer question | Dehui Mining answer |
|---|---|
| Which stream is a filter press best for? | Fine slime dewatering where the water circuit has to close and the cake has to belt. |
| What is the main advantage? | Cake dry enough for belt transport and filtrate clear enough to reuse in the washing circuit. |
| What is the typical duty? | Thickener underflow dewatered in 22–40 bar cycles, sized from actual fines generation. |
| What decides the press size? | Slime tonnage, feed solids concentration and the cake moisture target. |
| When is it not the first choice? | Coarse product dewatering — vibrating screens and centrifuges are cheaper per ton there. |
| What is the delivery time? | 45–60 days including the plate pack. |
| What warranty comes with it? | 12 months; plates and filter cloth in stock. |
| What should my RFQ include? | Slime tonnage, solids concentration and the cake moisture target. |
Three duties this equipment is built for. Each application page carries the full process detail and field notes.
Turning slime into conveyable cake and clear water.
Thickener plus press for a closed water circuit.
Meeting discharge limits with no liquid waste stream.


XMZ series filter presses use a program-controlled hydraulic clamping cycle with automatic plate shifting, so one operator can run the slime dewatering circuit alongside the rest of the plant.
Indicative ranges only. Final figures are fixed once your coal data and site conditions are confirmed.
| Parameter | Typical range | What decides it |
|---|---|---|
| Filtration area | 30–500 m² | Sized from slime tonnage and cycle time. |
| Cake moisture | 18–28% (coal slime) | Depends on slime fines content and press type. |
| Cycle time | 20–45 min | Affects the number of presses needed. |
| Control | PLC program control, hydraulic clamping | Enables one-operator slime circuit operation. |
Every unit is configured from your washability data, feed size distribution and product target — then factory-assembled and tested before shipment.

Industrial Grade · Factory assembly tested
Program-controlled chamber filter press with hydraulic clamping and automatic plate shift for coal slime dewatering.

Industrial Grade · Factory assembly tested
Diaphragm squeezing after filtration for lower cake moisture where the product needs further handling.

Industrial Grade · Factory assembly tested
High-capacity press with automatic plate movement for plants running continuous slime dewatering cycles.
Send us your raw coal capacity, feed size and product target — our engineers will recommend a suitable configuration.
Start from dry slime tonnes per hour, target cake moisture and cycle time, then add margin for fines variation. We run the calculation against your slime size distribution rather than a rule of thumb.
For typical coal slime, chamber presses reach roughly 20–26% and membrane presses can go lower. The dominant factor is the proportion of ultra-fines in the slime.
With correct flocculant dosing upstream, filtrate is normally clear enough to return to the washing circuit. We specify the dosing point as part of the water balance design.
