Coking Coal Washing Solution

Coking Coal Washing Solution

Deep washing for coking coal with jig + flotation or dense-medium circuits, engineered for low product ash.

SOLUTION OVERVIEW

Coking Coal Washing Solution

Coking coal is judged by ash, sulphur and caking properties — every point of ash removed raises oven yield and coke strength. Deep washing needs finer separation: primary jigs or dense-medium cyclones for the coarse fractions, flotation for –0.5 mm fines, and careful middlings control so good coal is not lost with rejects.

Our references in Shanxi, Xinjiang and Zimbabwe show clean coal recovery up to 92% with product ash from 9.2%, even on difficult, high-sulphur seams.

600K–2.4M TPYCapacity range
92%Peak clean coal recovery
9.2%Lowest product ash delivered
–0.5 mmFlotation feed fraction
Process Flow

Typical Process Flow

Six stages from raw coal to loaded product — each engineered against your washability data and plant layout.

  1. Desliming

    Screening splits feed at 0.5 mm so coarse and fine circuits can each run at their best density.

  2. Primary Separation

    Three-stage jigs or dense-medium cyclones cut ash in the coarse fractions.

  3. Flotation

    Froth flotation recovers fine clean coal that would otherwise report to tailings.

  4. Dewatering

    Centrifuges and dewatering screens bring coarse products to transport moisture.

  5. Filter Pressing

    High-pressure presses turn flotation tailings and slime into handleable cake.

  6. Blending & Storage

    Product blending keeps ash within the contract band before dispatch.

CORE EQUIPMENT

Equipment In This Solution

Manufactured in-house at our 100,000 m² base and trial-run before shipment.

REFERENCES

Related Project Cases

Need a flowsheet for your coal?

Send your washability data and target capacity — our engineers reply with a preliminary flowsheet within 12 hours.

Get Your Plant Design

Get a Quote

Jig machine for coal washing