Coking Coal Crushing

Coking Coal Crushing

Coking coal loses value when it is over-crushed. Size reduction has to protect the coking properties that the buyer is paying for.

Application Scenarios

Coking Coal Crushing

Coking coal is not sold on calorific value alone. Vitrinite content, ash, sulphur and — critically — the size distribution of the product all affect its value to a coke plant. Over-crushing damages coking performance and can breach contract specifications.

That changes how a crushing station is designed. Where thermal coal crushing can accept a high fines proportion, coking coal crushing has to hold the fines fraction within a limit, which usually means a gentler crusher type, a pre-screen, and a lower reduction ratio per stage.

We design coking coal crushing around the target size distribution, then verify that the crusher selection can hold it across the expected feed variation — because coking coal seams vary more than buyers often assume.

Selection from your coal dataCommissioning support includedSpare parts against original specification
Key Specifications

Coking Coal Crushing — What Decides the Specification

Indicative values. Final figures follow from your coal analysis and site conditions.

ParameterTypical Range
ParameterTypical requirement Product size0–50 mm or 0–25 mm depending on the coke plant requirement
Fines limitTypically capped by contract; check before selecting the crusher
Reduction ratioKept low per stage to limit fines generation
Feed consistencyBlending ahead of crushing reduces product variation
Wear partsHarder coal and gangue content drive liner specification
Where We Work

What We Have Learned on Site

A double-roll or sizer-type crusher is often a better fit than a hammer mill for coking coal, because it produces fewer fines at the same reduction ratio.

Where the plant washes coking coal, crushing size and jig or cyclone feed band have to be decided together — the two specifications constrain each other.

Product size distribution should be checked at commissioning, not assumed from the crusher datasheet.

FAQ

Coking Coal Crushing — Frequently Asked

Can I use the same crusher for thermal and coking coal?

Sometimes, but the settings differ and the fines proportion may not meet coking coal contract limits. We check both duties before confirming one machine.

Does crushing affect coking coal's free swelling index?

Crushing itself does not change the coal's inherent properties, but an unfavourable size distribution can reduce the value realised at the coke plant.

Get a Quote

Jig machine for coal washing